Soru ve talepleriniz için bizi arayın
+90 232 328 34 70

Ürünlerimiz

HM-820NFP-SV/HM-1000NFP-SV
High Speed Heavy Duty Soft Loop Handle & Patch Handle Plastic Bags Making Machine
PATCH WELDING UNIT :

The patch handle film feeding system is driven by pneumatically. The reel of patch film is fed, cut and welded automatically to the top central position of the PE Carrier Bag.

New Type Sub-Material Feeding System: The thickness of sub-material can be smaller.

Rotary Type Transmitting System drives steadily resulting the increase of production quantities.

Air Transmitting System is easy to maintain.

THE MANUFACTURE OF THE SOFT LOOP CARRIER BAGS:
At the rear, one unwind station for the polyethylene handle film. The film width is identical to the loop length. The film is cut into narrow strips, and fed into the top fold. The flexible handle film feeding system is driven by pneumatic control. The roll of film is fed, cut and welded automatically and is precisely positioned to the center of the carrier bag.
ABOVE:
Handle hole punching unit with a heated knife, fail-safe with a clean cut edge and weano resistant.
PHOTO-CELL CONTROL:
The series of machine uses Erwin Sick Photocell for precise control of print image to the side weld.

PRE-WARMING STATION:
Additional stabilisation of the side weld in the area of the bottom gusset and top gusset by the pre-sealing station for the four layers of film.
AUTO CONVEYOR TABLE:
The conveyor belt will auto slow moving while producing the soft loop handle bag, the finish production will falling in line for convenience collection. The conveyor belt is stop while producing the patch handle bag, the finish production is pcs by pcs overlap on the conveyor table. The machine will auto stop until reach to the number of bag quantity, and the conveyor table will moving again for the next stack.

UNWIND SYSTEMS AND TOP FOLD :
The unwind unit is equipped with a pneumatic hydraulic web guide control system. The maximum reel diameter is 90m and maximum film width 85cm, maximum real weight 150kgs. For converting sheet film, a folding unit can be purchased to run inline with the machine. A low friction top folding device for a single or twin sided fold through system of folding rollers with guide plates is fitted. The whole unit is well designed for ease of operation and low maintenance.

SPECIFICATIONS:
Model HM-820NFP-SV HM-1000NFP-SV
Bag Size (mm) width 250-650mm 250-650mm
Length 250-650mm 250-850mm
Top
Folding
max.75mm max.75mm
Bottom Gusseting up to 65mm up to 65mm
Production Speed (Cycles/Min.) Patch 100 pcs
Soft handle 80 pcs
Die cut 100 pcs
Thickness of Film(mm) 0.045~0.09 0.045~0.09
Heaters(kw) 3KW x 1
0.3KW x 6
0.4KW x 6
4KW x 1
0.3KW x 6
0.4KW x 6
Power Required(KW) 10KW 11KW
Machine Dimension L(M) 7.6 7.6
W(M) 3.2 3.4
H(M) 1.85 1.85
Machine weight(KG) 5000 5600
Air Compressor (not included) 7.5HP 7.5HP

Tüm Firmalarımız ISO 9001-2000 Kalite Yönetim Sistemi, CE Avrupa Birliği Kalite Standardı belgelerine sahiptir.